PETG-CF
On requestCarbon-filled PETG: high stiffness with water and chemical resistance.
- Rigid
- Impact resistant
- Water resistant
- Heat resistant
- Chemically resistant
- Fatigue resistant
- Composite
Composite
At a glance
The 1–10 figures are a relative comparison within this catalogue, not a measurement.
PETG-CF is not stocked, so it can't be ordered from the configurator. Email us and we'll quote it as a special run.
Overview
Carbon fibre in PETG combines PETG toughness and water resistance with much higher stiffness and a service temperature near 80 °C — above PLA and PETG, below ABS and ASA. A hardened nozzle is required and the surface is matte.
Pros
- High stiffness with useful toughness
- Service temperature near 80 °C
- Water and chemical resistant
- Dimensionally stable, low warping
Cons
- Requires a hardened nozzle
- Matte dark colours only
- Needs a hot bed and dry filament
- Costs more than plain PETG
Typical values for this material class. Actual figures vary by filament brand and print settings — these are not a guarantee for your part.
Characteristics
- Price from
- €10.23
- Technology
- FDM
- Availability
- On request
- Queue
- Live — printed in order of payment
- Colour options
- See the configurator for colours on the shelf
- Tolerance
- ±0.2 mm or ±0.2 % — whichever is greater
- Minimum wall thickness
- 1.00 mm
- Build size (max)
- 300 × 300 × 300 mm
- Max service temperature
- 78 °C
- Infill
- Adjustable (15 % standard)
- Finishes
- normal
- Order fee
- €7.00 once per order
"Price from" is the real charge for 20 mm cube, 15 % infill, one part — excludes shipping. “From” prices are the real charge for one reference part (20 mm cube, 15 % infill), computed by the same engine as your quote and including the €7.00 order fee, before shipping. Your part's price depends on its size, height and quantity — the live quote in the configurator is binding.
Queue open